Covering Norwich and the surrounding area Monday to Friday 0900 to 1700 Request a call-out

Sonde & Tracing in Drayton - Pipe Materials, Survey Options and Honest Pros and Cons

When we carry out a sonde and tracing survey in Drayton, the type of pipe underground shapes both the method we use and the repair options available once the fault is located.

Est. 2025 Told what it will cost before we start You see what was wrong Cleared up before we leave
Sonde & Tracing - work in progress

Clay vitrified pipes, common in drainage runs laid before the 1970s, are hard and long-lasting but have spigot-and-socket joints sealed with mortar or a rubber ring - both of which deteriorate over decades and allow root intrusion. Clay responds well to sonde tracing, and defective joints in otherwise sound clay pipe are good candidates for no-dig patch lining. Pitch-fibre pipes, used heavily from the 1950s to the early 1970s, present a different picture: they absorb moisture over time, deform into an oval or figure-eight cross-section, and can collapse under vehicle loading or simply under their own weight when heavily degraded. A sonde can locate them and identify where the pipe has deformed or collapsed, but lining is often not possible in heavily deformed pitch-fibre because the liner cannot achieve a round bore to bond to. Replacement is the more reliable solution in those cases.

Modern uPVC and HDPE plastic pipes are flexible, root-resistant at the pipe body, but still vulnerable at joints and at junctions where different pipe diameters meet. The joints on plastic pipes can pull apart under ground settlement, and junctions can crack if loading above ground shifts. Sonde tracing locates these faults with the same accuracy as on older materials, and because the pipe body is usually sound, patch lining at the specific joint or junction is often all that is needed. The honest position on survey methods is this: a sonde-only trace tells you where the pipe runs and where the obstruction is; a combined CCTV and sonde survey tells you that and also shows you the condition of the pipe wall, which is the information you need to decide between patch, line, or replace. For any job where the pipe material is unknown or the history is unclear, the combined approach is worth the additional cost.

What you get

  • Chambers lifted and the run checked, so the work starts from what is actually happening rather than from the symptom.
  • The blockage cleared with the right tool for the pipe: rods, a machine or the jetter, chosen so the pipe is not damaged getting through it.
  • The cause looked for once it runs, on camera where it is not obvious from the chamber.
  • What we found explained in plain words, with stills or footage if you want them.
  • The area washed down and the covers back properly before we leave.

Sonde & Tracing in Drayton?

Ring and speak to the engineers who will be doing the work, or send the form with the postcode and what is happening.

Call Call-out