Covering Norwich and the surrounding area Monday to Friday 0900 to 1700 Request a call-out

High Pressure Water Jetting in Drayton

High pressure water jetting in Drayton works on all common drain pipe materials, but the right approach depends on what your pipes are made of and what their condition is likely to be.

Est. 2025 Told what it will cost before we start You see what was wrong Cleared up before we leave
High Pressure Water Jetting - work in progress

High pressure water jetting forces water through drain pipework at high pressure to dislodge and flush out blockages including grease, compacted silt, mineral scale and soft root intrusions. The method is suitable for domestic and commercial drains and leaves the pipe interior in a cleaner state than mechanical rodding.

Drain pipes come in a handful of materials and each behaves differently under jetting. Vitrified clay is the most common material in older drainage systems and handles jetting well, but its socketed joints are where roots enter and where debris ledges form over time. Modern uPVC pipe is smooth-bored and resistant to root ingress where joints are properly made, but it has a lower pressure tolerance than clay and should be jetted at reduced pressure settings to avoid joint displacement. Cast iron, found on older commercial and Victorian domestic properties, corrodes internally and builds a rough bore that accumulates grease readily; it jets well but can be damaged if the pipe wall is already significantly thinned by corrosion. Pitch fibre pipe, installed in some post-war housing, deforms over time into an oval bore and can delaminate if jetted too aggressively. The honest trade-off is that knowing your pipe material allows the operative to set the correct pressure and choose the right nozzle, while jetting blind at maximum pressure risks damage to older or degraded pipes. If you do not know what your drains are made of, a brief CCTV survey before jetting removes the guesswork.

What you get

  • Chambers lifted and the run checked, so the work starts from what is actually happening rather than from the symptom.
  • The blockage cleared with the right tool for the pipe: rods, a machine or the jetter, chosen so the pipe is not damaged getting through it.
  • The cause looked for once it runs, on camera where it is not obvious from the chamber.
  • What we found explained in plain words, with stills or footage if you want them.
  • The area washed down and the covers back properly before we leave.

High Pressure Water Jetting in Drayton?

Ring and speak to the engineers who will be doing the work, or send the form with the postcode and what is happening.

Call Call-out