Covering Norwich and the surrounding area Monday to Friday 0900 to 1700 Request a call-out

High Pressure Water Jetting in Bungay

High pressure water jetting in Bungay follows a methodical process, and understanding each stage helps you know whether the job has been carried out properly.

Est. 2025 Told what it will cost before we start You see what was wrong Cleared up before we leave
High Pressure Water Jetting - work in progress

High pressure water jetting clears blocked drains by forcing water through the pipe at high pressure via a self-propelling nozzle that cuts through obstructions and flushes them downstream. It is effective on grease, silt, scale and soft root growth and leaves the pipe cleaner than rodding or chemical treatment.

The process starts with a walkover of the accessible drain covers and gullies to establish which runs are blocked and where the flow direction goes. The operative identifies the downstream inspection chamber and feeds the jetting hose from there where layout allows, so the blockage is pushed with the natural flow. The pump is set to a pressure appropriate to the pipe material and diameter before the nozzle is advanced through the obstruction in passes, working backwards to drag debris towards the chamber. Flow is checked at the downstream chamber after each pass and the process repeated until the water runs clear and without restriction. Once the main run is clear, the gully pots and chamber benching are flushed clean and the covers are replaced firmly. If a CCTV survey is included, the camera is introduced at this point while the pipe interior is clean and visible. Before leaving, the operative should tell you what was found, what material the blockage consisted of, and whether any structural issues were noted during the work. A job in Bungay that ends without that summary should prompt you to ask for it directly.

What you get

  • Chambers lifted and the run checked, so the work starts from what is actually happening rather than from the symptom.
  • The blockage cleared with the right tool for the pipe: rods, a machine or the jetter, chosen so the pipe is not damaged getting through it.
  • The cause looked for once it runs, on camera where it is not obvious from the chamber.
  • What we found explained in plain words, with stills or footage if you want them.
  • The area washed down and the covers back properly before we leave.

High Pressure Water Jetting in Bungay?

Ring and speak to the engineers who will be doing the work, or send the form with the postcode and what is happening.

Call Call-out